BULGARI Case Back Screwdriver 2.3mm

Product Description

This is a precision screwdriver specifically designed for BULGARI watch case backs, featuring a 2.3mm blade width. It is primarily used for removing or tightening the small screws on BULGARI case backs. The precision-machined blade perfectly fits the unique BULGARI screw slots, effectively preventing stripping and protecting the expensive watch case.

This tool is essential for battery replacement, movement service, or strap changes.

Feature	Description
Compatible Brand	BULGARI
Application	Case back screws
Blade Size	2.3 mm
Handle Design	Non-slip handle for comfortable grip
Core Function	Remove/tighten small fixing screws on BULGARI case backs
Blade Material	Hardened stainless steel, precision machined

Feature

Description

Compatible Brand

BULGARI

Application

Case back screws

Blade Size

2.3 mm

Handle Design

Non-slip handle for comfortable grip

Core Function

Remove/tighten small fixing screws on BULGARI case backs

Blade Material

Hardened stainless steel, precision machined

Usage Instructions

Step	Instruction
1. Fit Confirmation	Before operation, confirm that the screw slot matches the blade tip perfectly
2. Removal	Insert the blade vertically into the screw slot and turn counter-clockwise to loosen
3. Installation	When reinstalling, hand-tighten clockwise first, then gently tighten with the screwdriver
4. Torque Control	Case screws are typically small – do not over-tighten; ensure the screw sits flush with the case surface

Step

Instruction

1. Fit Confirmation

Before operation, confirm that the screw slot matches the blade tip perfectly

2. Removal

Insert the blade vertically into the screw slot and turn counter-clockwise to loosen

3. Installation

When reinstalling, hand-tighten clockwise first, then gently tighten with the screwdriver

4. Torque Control

Case screws are typically small – do not over-tighten; ensure the screw sits flush with the case surface

Important Notes

Note	Details
Vertical Force	Always keep the screwdriver perpendicular to the screw slot; angled operation may cause slipping and scratch the case
Avoid Stripping	If screw feels stuck, do not force it – apply penetrating oil or consult a professional watchmaker
Blade Fit	2.3mm is designed for specific BULGARI case back screws – verify your watch uses this size before purchase
Professional Advice	If you lack repair experience, professional installation by a watchmaker is recommended

Note

Details

Vertical Force

Always keep the screwdriver perpendicular to the screw slot; angled operation may cause slipping and scratch the case

Avoid Stripping

If screw feels stuck, do not force it – apply penetrating oil or consult a professional watchmaker

Blade Fit

2.3mm is designed for specific BULGARI case back screws – verify your watch uses this size before purchase

Professional Advice

If you lack repair experience, professional installation by a watchmaker is recommended

Maintenance & Service Guide

Aspect	Guidance
Blade Care	Wipe the blade with a soft cloth after use; replace if the tip shows wear or rounding
Storage	Store in a dry place to prevent rust; a dedicated tool case is recommended
Inspection Period	Inspect the blade for deformation or wear before each use
Replacement Criteria	Replace the screwdriver or blade if severely worn to prevent screw damage

Aspect

Guidance

Blade Care

Wipe the blade with a soft cloth after use; replace if the tip shows wear or rounding

Storage

Store in a dry place to prevent rust; a dedicated tool case is recommended

Inspection Period

Inspect the blade for deformation or wear before each use

Replacement Criteria

Replace the screwdriver or blade if severely worn to prevent screw damage

FAQ

Q1: Is this screwdriver compatible with all BULGARI watches?
A: This 2.3mm screwdriver is specifically designed for BULGARI case back screws. However, different BULGARI models may use different screw sizes. Please verify your watch‘s screw size before purchasing.

Q2: Can I use this screwdriver for other watch brands?
A: It may work if the screw slot size matches, but it is specifically optimized for BULGARI case back screws. For other brands, confirm the screw size first.

Q3: Why does my BULGARI case back screw feel stuck?
A: Screws can become stuck due to dirt, thread lock compound, or corrosion. Apply a small drop of penetrating oil and wait a few minutes before attempting again.

Q4: How tight should I tighten the case back screws?
A: Tighten until the screw sits flush with the case surface. Do not over-tighten, as this can strip the threads or damage the screw head.

Q5: Is this a genuine BULGARI tool?
A: This is a precision tool designed for BULGARI watches. Please confirm with your seller whether it is an original BULGARI tool or a high-quality aftermarket alternative.

Q6: Can I install this screwdriver myself?
A: The screwdriver requires no installation – ready to use out of the box. However, using it on your watch requires care. Professional service is recommended if you are inexperienced.