$280.00
You Saved
The Bergeon 3044-A is a professional rotating stand containing 10 stainless steel screwdrivers (Bergeon 30080 series) for watchmakers, featuring blade sizes from 0.50mm to 3.00mm. The stand rotates on a non-slip rubber base (Ø 90 mm) for easy tool access, and each screwdriver includes a color-coded swivel head for quick size identification.
This “First quality” set comes with spare blades stored in grey plastic tubes, making it an essential, well-organized kit for any professional watchmaking bench .
Included Screwdrivers
| Model | Blade Size | Colour Code |
|---|---|---|
| 30080-B | 0.50 mm | – |
| 30080-C | 0.60 mm | – |
| 30080-D | 0.80 mm | Yellow |
| 30080-E | 1.00 mm | – |
| 30080-F | 1.20 mm | – |
| 30080-G | 1.40 mm | – |
| 30080-H | 1.60 mm | – |
| 30080-J | 2.00 mm | – |
| 30080-K | 2.50 mm | Orange |
| 30080-L | 3.00 mm | – |
Blade Material
The 30080 series blades are made of 20 AP tempered steel (carbon steel) with a hardness of 54/58 HRC, not stainless steel . This allows the blades to hold a sharper edge but requires proper storage to prevent rust. Spare blades are stored in grey plastic tubes to protect them from moisture .
Proper Screwdriver Technique :
Grip: Hold the screwdriver with the swivel head pressed against your index finger for stability.
Rotation: Use your thumb and middle finger to rotate the screwdriver while maintaining consistent downward pressure.
Blade Fit: Always ensure the blade width matches the screw slot exactly to prevent damage to both the screw head and the blade .
Using the Rotating Stand:
Place the stand on a clean, stable workbench
The non-slip rubber base keeps the stand securely in place
Rotate the stand to access the desired screwdriver quickly
Return each screwdriver to its designated position after use
Blade Selection:
Select the appropriate blade size for the screw you are working on
The blade should fill the entire screw slot width without protruding beyond the edges
The Bergeon 3044-A comes fully assembled and ready for immediate use. No installation is required.
Initial Setup:
Remove the stand from its original Bergeon packaging
Place the stand on a clean, level workbench
Verify that all 10 screwdrivers are present and undamaged
Check that the spare blades are in the grey plastic tubes
The stand is ready for use
Storage:
Store the stand on a clean, dry surface when not in use
Keep away from moisture to prevent rust on carbon steel blades
Return the stand to its original packaging for long-term storage or transport
Daily Maintenance:
Wipe each screwdriver blade and handle with a soft, dry cloth after use
Inspect blade tips for wear, burrs, or damage
Return screwdrivers to their designated positions in the stand
Blade Replacement:
Blades are consumable items and should be replaced when worn
Use genuine Bergeon replacement blades for optimal fit
Spare blades are included in the set (stored in grey plastic tubes)
To replace: loosen the set screw, pull out the old blade, insert new blade, tighten set screw
Blade Refinishing :
Blades can be refinished using a sharpening stone or the Bergeon 30081 sharpening jig
The decorative rings on the blade indicate the correct clamping position for the sharpening jig
Maintain the original angle to ensure proper fit in screw slots
Storage:
Store the stand in a dry environment to prevent rust on carbon steel blades
Keep spare blades in their original grey plastic tubes to prevent loss and protect from moisture
Do not store with pressure applied to the blades
When to Replace Blades:
Blade tip is chipped or cracked
Blade is bent or deformed
Tip is worn down and no longer fits screw slots properly
Q1: Is this a genuine Bergeon product?
A: Yes. The Bergeon 3044-A is a genuine Swiss-made Bergeon product, manufactured to the highest standards for professional watchmaking use. This “First quality” designation indicates top-grade professional specification.
Q2: Are the blades stainless steel?
A: No. The 30080 series blades are made of 20 AP tempered steel (carbon steel) with a hardness of 54/58 HRC, not stainless steel . Carbon steel blades can hold a sharper edge but are susceptible to rust if not properly stored .
Q3: What blade sizes are included in this set?
A: The set includes 10 screwdrivers with blade sizes: 0.50, 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50, and 3.00 mm . This covers the most common sizes used in watchmaking.
Q4: Does the set include spare blades?
A: Yes. The set includes spare blades stored in grey plastic tubes for each size. This ensures you can continue working without interruption when the primary blade becomes dull or damaged .
Q5: Can I sharpen the blades myself?
A: Yes. The blades can be refinished using a sharpening stone or the dedicated Bergeon 30081 sharpening jig. The decorative rings on the blade serve as a guide for correct clamping in the sharpening jig . Always maintain the original angle to ensure proper fit in screw slots.
Fast worldwide shipping within 3 business days.
Competitive pricing on Seiko/Hattori calibers.
3,000+ watch movements and parts in stock.
Trusted by watchmakers worldwide.
Personalized sourcing support via [email protected] or WhatsApp +86 18620212114.
