(0)

Tips on Taking Care of your Rolex Watch

Maintaining your Rolex watch is essential to ensuring its longevity and keeping it in good working order.

 

As we all know, the Rolex watch is an expensive investment, so it is important to take care of it properly. For some, taking care of a Rolex watch may seem like a daunting task, but it is actually quite simple!

 

Many are hesitant to clean their Rolex watch for fear of damaging it, but the truth is that a little bit of TLC can go a long way. There are a few simple things you can do to keep your Rolex looking and running like new.

 

This blog post is a comprehensive guide to everything you need to know about how to take care of your Rolex watch, from maintaining the strap, cleaning the dial, internal maintenance, and tips on maintenance cycles.

Properly maintaining the watch strap

Maintaining the strap on your Rolex watch is one of the most important steps in preserving its condition. The strap is what holds the watch to your wrist, so it is crucial to keep it in good shape.

 

What you are going to need:

How to care for a metal strap

For the metal strap in the Rolex watch, you will need mild soap, a bowl of water, a hand towel, and a toothbrush.

1. Remove the watch from your wrist.

2. Dampen the toothbrush in a bowl of water and add a few drops of mild soap.

3. Gently scrub the strap with the toothbrush, being careful not to damage the finish.

4. Rinse the strap with clean water and dry it off with a hand towel.

5. Reattach the watch to your wrist.

 

How to care for a metal strap

For the metal strap in the Rolex watch, you will need mild soap, a bowl of water, a hand towel, and a toothbrush.

1. Remove the watch from your wrist.

2. Dampen the toothbrush in the bowl of water and add a few drops of mild soap.

3. Gently scrub the strap with the toothbrush, being careful not to damage the finish.

4. Rinse the strap with clean water and dry it off with a hand towel.

5. Reattach the watch to your wrist.

How to care for a leather strap

Leather straps are a bit more delicate than metal straps and require special care. You will need a clean, dry cloth, as well as a leather conditioner.

1. Remove the watch from your wrist.

2. Gently wipe down the strap with a clean, dry cloth. Take note: Avoid getting the leather too wet, as this can damage the strap.

3. Apply a small amount of leather conditioner to the cloth and rub it into the strap.

4. Let the conditioner soak in for a few minutes before rubbing it off.

5. Reattach the watch to your wrist.

 

How to care for your Jubilee watch strap

The Jubilee watch strap is made of interwoven metal links and is a bit more delicate than other straps. You need mild soap, a bowl of water, and a hand towel. Also, you will need a toothbrush, tweezers, and a watch case opener.

1. To clean your Jubilee watch strap, start by adding a few drops of mild soap to a bowl of lukewarm water.

2. Next, use your hands to gently agitate the water and create suds.

3. Then, take the Jubilee watch strap and submerge it in the soapy water.

4. After a few minutes, use your fingers to lightly scrub the Jubilee watch strap, paying special attention to any areas that seem dirty or grimy.

5. Once you’ve scrubbed the strap, rinse it thoroughly in clean water to remove all traces of soap.

6. To remove any water spots, use a soft, dry hand towel to lightly pat the Jubilee watch strap dry.

7. Finally, use a toothbrush to lightly scrub any remaining dirt or grime from the Jubilee watch strap.

8. Once you’ve finished cleaning the Jubilee watch strap, reattach it to your watch and enjoy!

How to clean the Cleaning the Dial

Cleaning the dial on your Rolex watch is a relatively simple process that only requires a few basic supplies. This section will walk you through the steps necessary to clean your Rolex dial in just a few minutes. There are two parts: cleaning the glass dial and the other is caring for the metal case.

What you are going to need:

Cleaning the glass dial

1. Start by removing the watch from your wrist. If your watch has a leather strap, you will need to remove it before proceeding.

2. Using a rubber ball, apply pressure to the dial and rotate the ball in a circular motion.

3. Next, take a watchmaking glove and lightly dampen it with water. Gently wipe the dial in a circular motion.

4. Finally, use a polishing cloth to buff the dial until it shines.

Caring for the metal case

1. Start by removing the watch from your wrist and unscrewing the case back using a screwdriver.

2.Open with Rolex case back opener.

3.Use dust blower to blow away the dust on the dial surface, then use cleaning clay to stick away the fingerprints and dust on the dial surface. Attention that Rolex cannot be cleaned with water.

Internal maintenance

Your Rolex watch is a complex piece of machinery, and like all machines, it needs regular maintenance to function properly. Opening the case and servicing the movement are delicate procedures that should only be performed by a qualified watchmaker.

This section will provide you with some tips on how to keep your Rolex watch in good working order and help you troubleshoot any problems that may arise.

Opening the case

The first step in any maintenance procedure is to open the case. This can be done by Rolex case back opener. Once the case is open, you will be able to see the movement and all of its components.

Inspection

Once the case is open, it’s time to inspect the movement for any dirt or debris. You should also check the hands and dial for any signs of wear or damage. If you see anything that needs to be addressed, take the watch to a qualified watchmaker for servicing.

Replacing broken parts

If any of the parts in the movement are broken, they will need to be replaced. This is a delicate process that should only be performed by a qualified watchmaker.

Take Rolex’s most commonly used movement, the 3135, as an example. The most frequently damaged parts are the Axle and mainspring, and the watch glass is the most easily damaged external part.

Cleaning

Even if you can’t see any dirt or debris, it’s important to clean the movement on a regular basis. Rolex can only use a special cleaner for cleaning watch movements.

 

Oiling

Oiler:

https://soflypart.wpengine.com/product/bergeon-30102-4-4-oilers/

Oil cups 

https://soflypart.wpengine.com/product/china-make-4-oilers-with-4-ceramic-oil-cups-set/

Once the movement is clean, it’s time to relubricate all of the jewels. Use a watch lubricant that is specifically designed for use on watches.

Assembling the watch

Once you’ve finished all of the maintenance procedures, it’s time to reassemble the watch. Start by placing the movement back into the case. Then, screw the case back on and snap the bezel closed. Finally, wind the watch and set the time.

Now that you know how to perform basic maintenance on your Rolex watch, it’s time to understand the maintenance cycles of the Rolex watch.

Maintenance cycles

The general maintenance cycle for Rolex watches is about 5 years. It is very important to clean and re-lubricate the movement regularly because after a long period of wear, the parts of the watch movement will be worn to varying degrees and the metal powder that falls off due to wear may damage other parts. Of course, Rolex is one of the most durable and accurate watches in the world based on its design, materials and watchmaking techniques.If you have any questions regarding professional Rolex watch repair or routine maintenance, contact us.

Summary

There you have it! Now you know how to clean your Rolex watch dial and how to perform basic maintenance on your timepiece.

Be sure to follow these steps regularly to keep your watch in good working order. And if you ever have any questions about servicing or repairing your Rolex watch, don’t hesitate to contact a qualified watchmaker.

FAQ

What to do if I damaged the glass on my Rolex watch?

Answer: If you damage the glass on your Rolex watch, it’s important to take it to a watch repair specialist as soon as possible. They will be able to evaluate the damage and determine if the watch can be repaired or if it needs to be replaced.

Don’t twist the watch crown. Glass shards will damage hands and dial

Conclusion

The intricate mechanism of each watch is a work of art. Every luxury watch has its level of craftsmanship and quality. Each is created artistically by expert watchmakers making the timepiece have an elegant design and accurate timekeeping. But, luxury watch collectors prefer mechanical or automatic movements. Let yourself fall into one of the types of a watch movement and share your ideas below if you have different insight!

Recent Blog

Leave a Reply

Your email address will not be published. Required fields are marked *